top of page

What Should Landlord Boiler Cover Include?

Oct 29
7 min read

Updated: Oct 30

Landlord Boiler Cover Checklist — Better Gas Plumbing & Heating checklist visual guide

By Better Gas Plumbing & Heating

Landlord boiler cover should give you a clear answer to three questions: what breakdowns are covered, what costs will be paid, and what conditions could allow the provider to reject a claim. It should not be treated as a replacement for servicing, maintenance or the annual gas safety check.

Some products are insurance policies, while others are service or breakdown plans. They may cover engineer call-outs, parts and labour, but often exclude pre-existing faults, poor maintenance, certain boiler types or replacement beyond a stated limit. Reading the exclusions and claim conditions is just as important as checking the headline cover.

In short: choose landlord boiler cover by checking the repair limits, excess, boiler eligibility, maintenance conditions and replacement exclusions. Keep separate arrangements for servicing and the legally required gas safety check.

What can landlord boiler cover include?

The exact wording depends on the provider and product, but boiler cover commonly focuses on breakdown assistance rather than routine care. A suitable policy or plan may include some combination of the following:

  • Engineer attendance when the boiler stops working.

  • Diagnosis of a covered mechanical or electrical fault.

  • Labour for an approved repair.

  • Replacement parts, subject to limits and eligibility.

  • Cover for controls such as thermostats, where specifically listed.

  • Contributions towards replacing a boiler that cannot be economically repaired, where the policy allows this.


Do not assume that every item above is included. Some plans cover labour but restrict parts, while others set a maximum claim value or a limit on the number of call-outs. A policy may also pay only for the immediate repair, leaving you responsible for improvements, upgrades or replacement of an obsolete system.


Breakdown cover is not the same as boiler servicing

Breakdown cover generally responds after a fault occurs. A boiler service is planned maintenance intended to check operation, combustion and safety, and to identify problems before they develop into a breakdown. Neither should automatically be assumed to include the other.

Landlords also have separate gas safety responsibilities. Where gas appliances are provided in a rented property, the landlord must arrange the required gas safety check by a Gas Safe registered engineer at the appropriate interval and provide the relevant record to tenants. A breakdown policy does not discharge that legal duty.

When comparing products, look for separate wording for “breakdown”, “service”, “inspection” and “gas safety”. If a plan advertises all four, check whether they are included in the price or offered as optional extras with different conditions.


Which exclusions should landlords check?

Exclusions are often where the practical value of boiler cover is decided. Before buying, read the policy schedule, terms and conditions, and any eligibility statement rather than relying on the summary page.


1. Pre-existing or known faults

Many policies will not cover a fault that was already present before the policy began. Some also apply a waiting period before claims can be made. This is intended to prevent a customer taking out cover only after a boiler has already failed.

Ask whether the provider requires the boiler to be working at the start of the policy and whether a recent service record is needed. If the boiler is already showing warning signs, disclose them and ask for a written answer about whether the issue can be covered.


2. Age, condition and boiler type

There may be an upper age limit, restrictions based on the manufacturer or model, or a requirement for the boiler to be in reasonable working condition. Older appliances can also be excluded from replacement even where a repair is covered.

Check whether the policy applies to the actual appliance at the rented property, including its fuel type and system arrangement. A standard boiler plan may not cover a commercial appliance, communal heating system, heat interface unit or other equipment unless the wording expressly includes it.


3. Lack of servicing or poor maintenance

A provider may exclude faults linked to inadequate maintenance, limescale, sludge, corrosion, frozen condensate pipes or damage caused by an external issue. It may also require servicing at a stated interval and ask for evidence when a claim is made.

This does not mean every missed service automatically invalidates every claim. The important point is to check the precise condition and how it relates to the fault. Ask whether servicing is compulsory, who must carry it out, what records must be kept and whether the provider can refuse a claim where maintenance is not documented.


4. Parts and components outside the boiler

A boiler may be covered while connected equipment is not. Common examples include radiators, pipework, pumps, valves, thermostats, programmer controls, cylinders and water tanks. Some policies cover selected controls but exclude the wider heating system.

Look for wording such as “boiler only” or “central heating system”. If a tenant reports no heating, the cause may not be the boiler itself, so knowing the boundary matters when deciding whether a plan is likely to help.


5. Damage, leaks and consequential loss

Boiler cover may not pay for water damage, damage to flooring or ceilings, tenant belongings, loss of rent, alternative accommodation or other consequential costs. Those risks may sit under buildings, contents or landlord insurance, depending on the circumstances and the policy.

Check the wording carefully if the boiler is leaking. A plan may cover repair of the appliance but not the resulting property damage, or it may exclude a leak caused by pipework that is outside the boiler cover.


6. Replacement limits and “beyond economic repair” decisions

Replacement is often subject to a financial cap, an age limit or the provider’s decision that repair is uneconomic. The policy may offer a contribution rather than a like-for-like replacement, and it may not pay for upgrades needed to meet current installation requirements.

Ask who decides whether a boiler is beyond economic repair and how that decision is made. Also check whether removal, disposal, installation, flue work, controls, system cleaning and compliance checks are included or charged separately.


7. Access, tenant actions and vacant properties

Policies can contain practical conditions about access to the property, reasonable care and how quickly a fault must be reported. A claim may be affected if an engineer cannot gain access, if the appliance has been altered, or if damage results from misuse or unauthorised work.

Tell the provider if the property is empty, undergoing refurbishment or used under a different arrangement from a standard tenancy. Unoccupied-property restrictions can be particularly important because some insurance products apply different conditions when nobody is living at the address.


What is usually your responsibility as landlord?

Boiler cover does not transfer every heating responsibility to the provider. You generally still need to arrange lawful installation, appropriate maintenance, gas safety checks and repairs that fall outside the contract or policy.

You should also keep records of the appliance, installation paperwork, service history, gas safety records, claims and repairs. These documents can help establish the boiler’s condition and maintenance history, and may be requested by an insurer, managing agent or engineer.

If a tenant reports loss of heating or hot water, deal with it promptly and establish whether there is an immediate safety concern. A boiler that smells of gas, shows signs of scorching or is producing unusual fumes should not be used until the situation has been assessed appropriately. Tenants should not be asked to dismantle or repair the appliance themselves.


How to compare landlord boiler cover

Rather than comparing only the monthly or annual price, use the following checks to compare what you would actually receive after a breakdown.

  1. Confirm the covered appliance. Record the make, model, fuel type, age and location, then check that the product accepts it.

  2. Separate service from breakdown cover. Find out whether a boiler service and gas safety check are included, optional or entirely separate.

  3. Check the claim limit. Look for limits on parts, labour, call-outs, annual claims and total repair costs.

  4. Check the excess. A lower premium may come with an excess for each visit or claim.

  5. Read the exclusions. Pay particular attention to age, corrosion, sludge, limescale, pre-existing faults, controls and external pipework.

  6. Understand replacement terms. Ask whether replacement is included, capped, subject to approval or excluded altogether.

  7. Check waiting periods. Establish when the first claim can be made and whether existing faults are excluded permanently.

  8. Confirm the claims process. Find out who must be contacted first and whether using another engineer could invalidate the claim.

  9. Check tenant and property conditions. Ask how access problems, vacant periods, subletting or unusual occupancy affect cover.


It is also worth asking what happens if the covered boiler cannot be repaired on the first visit. The answer may involve a further assessment, approval for parts, a contribution towards replacement or a separate arrangement for temporary heating. Do not assume that a policy includes all of these.


Is landlord boiler cover worth it?

It can be useful where you value predictable access to repair support and want to limit exposure to an unexpected breakdown. It may be less attractive if the policy has a high excess, low repair limit, extensive exclusions or strict conditions that are difficult to meet.

Compare the cover with the alternative of setting aside funds for repairs and arranging servicing separately. The right choice depends on the boiler’s age and condition, the number of properties you manage, how quickly a failure would affect tenants, and whether your existing landlord insurance already provides related protection.

Do not buy a plan simply because it uses the word “insurance”. Check whether it is regulated insurance, a maintenance agreement or a breakdown contract, and identify who is responsible if a claim is declined. Those arrangements can have different complaints procedures, exclusions and financial protections.


When should you arrange a boiler service?

Arrange a service before relying on a new cover product, especially if the boiler has an unclear history, has recently changed hands with the property or is showing performance problems. A service cannot guarantee that a breakdown will not occur, but it can identify condition and safety issues that may affect future cover.

Use a suitably qualified engineer for gas work and keep the paperwork. If you need a service or repair rather than an insurance policy, you can review the published boiler servicing information from Better Gas Plumbing & Heating and contact the business to ask whether its boiler servicing and repairs are suitable for the property.

If this is the stage you are working through, you can also use What to Record Before Calling a Boiler Repair Engineer for the next practical checks.


Questions to ask before buying

  • Is this insurance, a service plan or a breakdown agreement?

  • Is the specific boiler make, model and age eligible?

  • What is the excess for each claim or visit?

  • Are parts, labour and call-out charges all included?

  • Is there a waiting period or an existing-fault exclusion?

  • Is annual servicing required, and must it be arranged through the provider?

  • Are controls, radiators, pumps, cylinders, pipework and leaks included?

  • What is the maximum repair or replacement contribution?

  • What happens if the boiler is beyond economic repair?

  • Does the cover change when the property is empty or the tenancy ends?


Get important answers in writing. A telephone summary may not reflect the full contract, and the policy wording is what normally determines whether a claim is accepted.

Need a boiler service or repair? If you are checking a landlord boiler before choosing cover or dealing with a fault, contact Better Gas Plumbing & Heating about its boiler service and ask whether the service suits the job.

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page